Why Wrap Coil Machine Generate Sparks ?

When we use Shrapnel machine, we will encounter such a phenomenon, which is the machine will generate some sparks between spiral and Front shrapnel of the machine.

So how these sparks are generated? How can we solve it?

Today we will talk briefly with everyone.

 

1.New machine sparks.

When a new machine start to work, it will generate some sparks between spiral and Front shrapnel of the machine, which is a normal phenomenon. For this, we do not have to worry, because the machine can be used normally.

This is because there will be an anti-oxidation layer on the new machine shrapnel, however, the anti-oxidation layer will produce some sparks when is worn. The spark is called ”Quenching”.

 

2.The spiral is too tight against the front shrapnel

The spiral is too tight against the front shrapnel also generating some sparks. Because the pressure is too tight, the resistance between the screw and the front shrapnel will increase, which cause friction increased between the two. At that time, it is easy to generate spark.

Therefore, we need increase the distance between the screw and the front shrapnel .

 

3.Damaged shrapnel or capacitor

When the machine is used for long time, The surface of the front shrapnel of the machine will wear deep dents, and the spark between the shrapnel and the screw is no longer white, but blue.

At this time, we need notice particularly, there may be a problem with the machine's capacitance.

We must replace the shrapnel or do maintenance timely.

 

All right, Today's content is shared here. Thanks for watching!

 

Dragonhawk official Provide professional after-sales service